Nuclear Products

Vapor recovery dryers are designed to remove moisture from air in the reactor building. In a CANDU reactor, they remove heavy water. Moist air is passed through a tower containing moisture-absorbing desiccant. Dry air is exhausted into the building. The…
Strainers are used to remove coarse suspended particles from fluid systems.  CCI Thermal supplies strainers for capturing resin fines from deep bed ion exchange columns, up-stream strainers to protect pumps and other hydraulic rotating machinery and strainers for miscellaneous applications.…
Process waste water gets contaminated with leakage of lubrication oil or coolants used in machinery. Oils must be removed prior to discharging the spent water into the sewer system. CCI Thermal oil water separators use mechanical impingement and coalescing media…
There are many uses for restriction orifices in nuclear plants. Their main purpose is to reduce downstream pressure. Depending upon the degree of pressure reduction, single-stage or multi-stage orifices are used. Flow elements are used for precise measurement of flow.…
CCI Thermal supplies packages for the transportation of radioactive material. The annulus between the concentric cylinders is filled with foam that provides protection to the inner cylinder in case of severe impacts.
CCI Thermal Technologies Inc. designs and manufactures pressure vessel and tanks for process systems and liquid storage. These can be supplied in carbon steel, stainless steel and other alloys. Tanks and pressure vessel are designed to ASME pressure vessel code…
Ion exchange columns are used to remove dissolved radionuclides from boiler condensate water, reactor coolant water and fuel pool water. They use cation, anion or mixed bed resins. The resin exchanges undesirable ions present in water with harmless ions. CCI…
Hydrogen is released into the nuclear plant containment area under LOCA conditions. In the longer term under normal operation, radiolysis and corrosion can also increase hydrogen levels to the extent that a potentially explosive mixture of hydrogen and air could…
Filters are used to remove fine suspended particles from fluid streams. CCI Thermal Technologies Inc. supplies liquid filters for nuclear plant applications such as:  reactor coolant, coolant water make-up, condensate treatment, steam generator blow down, spent fuel pool water clean-up,…
Filter demineralizers are used to remove dissolved radionuclides from condensate water, reactor coolant water and fuel pool water. Filter demineralizers are an alternative to deep bed ion exchange columns in applications where the dissolved ion concentration is low.  A filter…
CCI Thermal nuclear filters incorporate high efficiency cartridges which provide optimum dirt holding capacity and low pressure drop.  Filtering media is carefully selected to suit the specific nuclear application.  A filter vessel may contain a single cartridge or a filter…
Fuel gas conditioning skids are used upstream of natural gas turbines which are used in auxiliary or emergency power generation units. Fuel gas conditioning skids remove contaminants and water moisture from the natural gas and provide appropriate heating to inhibit…
CCI Thermal Technologies Inc. designs, manufactures and tests custom engineered module systems. These systems typically consist of process equipment supplied by CCI Thermal or other vendors. Module systems are supplied complete with all interconnecting piping, instrumentation and controls.  Modules are…
Emergency Core Cooling (ECC) strainers provide protection for the reactor emergency core coolant pump and containment spray system pump under LOCA conditions.  ECC strainers are used to capture the large amount of pipe insulation and other debris that is dislodged…
Page 1 of 2

Related Nuclear Products

  • 1
  • 2
  • 3
  • 4